Aumeascon AM-D-FCL Digital Residual Chlorine Sensor

AM-D-FCL Digital Residual Chlorine Sensor



The Aumeascon digital residual chlorine sensor is a new generation of intelligent and digital water quality measuring sensor independently developed by Aumeascon. Adopt advanced non-membrane constant voltage residual chlorine sensor, no need to change diaphragm and medicine, stable performance, simple maintenance. It has the characteristics of high sensitivity, fast response, precision measurement, high stability, superior repeatability, easy maintenance, and multi-function. It can accurately measure the residual chlorine value in water solution. It is widely used in self-controlled dosing of circulating water, chlorine control in swimming pools, and continuous monitoring and control of residual chlorine content in aqueous solutions in drinking water treatment plants, drinking water distribution networks, hospital wastewater, and water quality treatment projects etc.


Technical Features

1. Isolation design of Power and output to ensure electrical safety.

2. Built-in protection circuit of power supply & communication chip

3. Comprehensive protection circuit design

4. Work reliably without additional isolation equipment.

4. Built-in circuit, it has good environmental resistance and easier installation and operation.

5, RS485 MODBUS-RTU , two-way communication, can receive remote instructions.

6. The communication protocol is simple and practical, and it is extremely convenient to use.

7, Output more electrode diagnostic information, more intelligent.

8. Integrated memory, store the stored calibration and setting information after power off..



Technical Parameters

1)Chlorine Measurement range: 0.00 ~ 20.00mg / L

2)Resolution: 0.01mg / L

3)Accuracy: 1% F.S.

4)Temperature compensation: -10.0 ~ 110.0 ℃

5)SS316 housing, platinum sensor, three-electrode method

6)PG13.5 thread, easy to install on site

7)2 power lines, 2 lines for RS485 Modbus

8)12VDC power supply, power supply fluctuation range ± 10%, 2000V isolation

评论

发表评论

此博客中的热门博文

Aumeascon AM-MP Water Quality Multi-parameters Meter

图片
AM-MP  Water Quality Multi-parameters Meter   Introduction Aumeascon AM-MP Multi-parameter water quality on-line analysis system integration platform, it can directly to measure 6~8 different sensors at same time , with touch screen panel display ,easy operation   and management; the system set on-line water quality analysis, remote data transmission, database and analysis Software, system calibration functions in one, the modernization of water quality data collection and analysis provides a great convenience.   Technical features ü  Real-time water quality measurement. ü  With digital water quality sensor. ü  Easy operation,all operation will will in one touch screen. ü  Data logger   function,all measured data will be recorded. ü  Download, AM-MP   multi-parameters water quality meter ü  W ith USB interface, user can download report by excel type. ü  W ireless platform   for op tional ,users only need insert ü...
阅读全文

Aumeascon AM-D-GEC Digital Graphite Conductivity Electrode

图片
AM-D-GEC    Digital Graphite   Conductivity Electrode AM-D-GEC digital graphite conductivity electrode   independently developed and produced by Aumeascon . The   housing of   conductivity sensor is SS316 and measurement electrode is graphite for harsh application , easy to install, and it has high measurement accuracy, sensitive response, and can work stably for a long time. Built-in temperature probe, instant temperature compensation. Strong anti-interference ability, the longest output cable can reach 500 meters. It can be set and calibrated remotely, and the operation is simple. It can be widely used in monitoring the conductivity   of thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food, fermentation, brewing and tap water and other   waste water application. Technical Specification Ø  Standard RS485 Modbus. Ø  Maximum transmission distance 500 meters. Ø  Independent chip, ...
阅读全文

Aumeascon AM-D-NH3N Digital Ammonia Nitrogen Sensor

图片
AM-D-NH3N    Digital Ammonia Nitrogen   Sensor Brief Introduction Th e Aumeascon AM-D-NH3N is digit al online ammonia  nitrogen sensor and with RS485 Modbus,it measure the ammonia nitrogen concentration by an ion selective electrode method.   The ammonia  ion selective electrode directly detects the ammonia  ion in the water environment to determine the concentration of ammonia  nitrogen. Use a pH electrode as a reference electrode for better stability. The concentration of ammonia  nitrogen in the measurement process is easily interfered by potassium ions, so potassium ion compensation is required. The   digital   ammonia  nitrogen sensor  is an integrated sensor that is composed of ammonia  ion selective electrode, potassium ion (optional), pH electrode and temperature electrode. These parameters can mutually correct and compensate the measured value of ammonia  nitrogen, and meanwhile achieve the measurement f...
阅读全文